Bugs item #2561963, was opened at 2009-02-03 21:30 Message generated for change (Comment added) made by mahsofo You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2561963&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Task Controller Group: None Status: Closed Resolution: Fixed Priority: 5 Private: No Submitted By: Michael (micges) Assigned to: Chris Radek (cradek) Summary: run from line in gcode with subs doesn't work Initial Comment: this is the buggy gcode: http://www.pastebin.ca/1326535 run it in sim_mm F1 F2 F3 CTRL-HOME R ESC at any line select line 61 MENU->MACHINE->RUN FROM SELECTED LINE expected behaviour: program will start from line 61 and continue running actual behaviour: program will start from line 241 any next try to sleecting and runnung from line will not work. ---------------------------------------------------------------------- Comment By: Michael Haberler (mahsofo) Date: 2011-05-03 12:15 Message: This bug is still present. Try the following .ngc fragment and do a run-from-line of the (debug..) statement just before M2. (debug, pre testsub declaration) o<testsub> sub (debug, testsub called) o<testsub> endsub (debug, pre testsub call) o<testsub> call (debug, post testsub call) m2 ---------------------------------------------------------------------- Comment By: Chris Radek (cradek) Date: 2010-07-13 02:10 Message: Fixed in master. ---------------------------------------------------------------------- Comment By: Jeff Epler (jepler) Date: 2009-02-04 01:51 Message: I have minimized the program that shows this problem. 1. Use configs/sim/axis.ini 2. Load the attached 'minimal.ngc'. 3. Click line 9 of the program 4. Right-click 5. Choose "run from here" Expected behavior: the program starts from line 9 and moves next to X1Y1 Actual behavior: the program starts from line 15 Tested version: TRUNK, 2009-02-02 Note: by changing the O-call lines to G0X0Y0Z2, the program behaves as expected File Added: minimal.ngc ---------------------------------------------------------------------- Comment By: Jeff Epler (jepler) Date: 2009-02-04 01:39 Message: Please use attachments to the bug report. by default, pastebin.ca posts expire, so in the future they might not be available for emc developers to look at. I have copied your part program from pastebin and will attach it this time. File Added: micges.ngc ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2561963&group_id=6744 ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
