Bugs item #3393277, was opened at 2011-08-17 19:08 Message generated for change (Tracker Item Submitted) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3393277&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: G-code Interpreter Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: G40-G80-G90 modal group in subroutines not is interpreted Initial Comment: I use iov2 tool change and axis interface.when press abort the interpreter read on_abort.ngc file. It normaly fuction ok, but if you want add a new G codes tipe G7-G8,G40-G41-G42,G90-G91,G80 it' not is interpreted and emc not have error. i have : O<on_abort> sub g18 g40 g80 g90 M65 P0 M65 P1 O<on_abort> endsub The command g17-g18-g19 and g54 modal group fuction good and are interpreted correctly in sub. The command g7-g40-g80-g90 modal group not is interpreted , not have effect , and not have error in emc in the sub. For prove it load the axis gui, every pusch estop and estop-reset the emc read on_abort and you can add the g code in on_abort.ngc for prove it. thanks ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3393277&group_id=6744 ------------------------------------------------------------------------------ Get a FREE DOWNLOAD! and learn more about uberSVN rich system, user administration capabilities and model configuration. Take the hassle out of deploying and managing Subversion and the tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2 _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
