2011/11/2 Peter C. Wallace <[email protected]>
> > Another important question. The motor's manual says continuous current is
> > 2.3A, peak current 6.9A, resistance 3.4 Ohm, inductance 1.2 mH.
> > Can I estimate required supply voltage from these data? Peak speed is
> near
> > 1 m/s.
>
> No, the missing parameter is the V/(M/S) constant which depends on the
> magnetics
>
> (like the Volts/RPM constant on rotating motors)
Sorry, here it is.
Back emf constant (line to line) 5.9 Vrms/(m/s)
Should I just multiply 5.9 * 1m/s to get the voltage or it's more
complicated and other parameters involved?
Andrew
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
