Bugs item #3463538, was opened at 2011-12-21 16:21 Message generated for change (Tracker Item Submitted) made by hpopols You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3463538&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: G-Code Remapping Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: xavier_h (hpopols) Assigned to: Michael Haberler (mahsofo) Summary: sim/remap/manualtoolchange fails on second run Initial Comment: Hi all, I get an error (M7x: restore_settings failed: 'F0.0 G1 G49) when I run two times the defaut gcode of the configuration : sim/remap/manualtoolchange. My setup : Ubuntu 9.10 from linuxcnc, EMC2 master (2.6pre) from Git ref : e693cca20504dd8d3195abceca97e21fa58bf752 date : Wed Dec 14 23:56:42 2011 +0100 . Compiled with "enable simulator" and "run in place". To reproduce the failure follows this steps : - Run emc 2.6pre : in the root path of emc-dev folder ". ./scripts/emc-environment" then "emc" and load the configuration "sim->remap->manual-toolchange-with-tool-length-switch->manualtoolchange" - "Estop off", "Machine on", "Home all", "run" the default gcode which engrave "1 3" - When the yellow led turns on click on "Change complete" then when the green led turns on click on "Simulate probe contact" - The program finish without errors - Now rerun the same program (play button) - When the yellow led turns on click on "Change complete" again Then just begin the probe movement, the gcode program stop with the error message : "M7x: restore_settings failed: 'F0.0 G1 G49" Thank you Best wishes Xavier ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3463538&group_id=6744 ------------------------------------------------------------------------------ Write once. Port to many. Get the SDK and tools to simplify cross-platform app development. Create new or port existing apps to sell to consumers worldwide. Explore the Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join http://p.sf.net/sfu/intel-appdev _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
