Bugs item #3474191, was opened at 2012-01-15 07:56 Message generated for change (Tracker Item Submitted) made by emcpt You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3474191&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: emcpt (emcpt) Assigned to: Nobody/Anonymous (nobody) Summary: Active GCodes do not work (at least some of them) Initial Comment: The active Gcodes window should reflect the current GCodes modes used by the machine. Using EMC 2.4.6 in a lathe mode configuration, using axis, without any special after configuration the following happens: Please do the following so that the issue can be repeated: Power machine so that MDI line can be used. Type in MDI: G18 G0 X100 Z0 G2 X100 Z-2.5 R1.25 F100 The code works as expected. Now create a .ncg file with only: G0 X100 Z0 G2 X100 Z-2.5 R1.25 F100 code does not work. Needs the G18 on it, meaning that it did not looked for the active GCodes (G18 was active as it was last used) Thank you Create a .ncg file containing only G0X100 Run the file ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3474191&group_id=6744 ------------------------------------------------------------------------------ RSA(R) Conference 2012 Mar 27 - Feb 2 Save $400 by Jan. 27 Register now! http://p.sf.net/sfu/rsa-sfdev2dev2 _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
