Primarily to advise that I tried the non-zero entry in the touch off entry box on my milling machine, also running the latest 2.6.0 beta, with exactly the same results.
Enter the value, and hit return or click apply, the new value is displayed in the axis dro readout for perhaps 1/2 second, then the axis screen goes away, followed over the next long second by any other hal windows opened also going away, exactly as if the quit in the pulldown, or the quit box on the axis border has been clicked on. Even with 0x7FFFFFFF in the debug, there aren't any errors recorded, in either of the .txt files, nor in the trace showing in the terminal linuxcnc was started from it all looks exactly like a quit cleanup. So does dmesg, it looks plumb normal. If I "linuxcnc -l" again, the offset itself has been applied, and one can reload and re-exec the code with the offset in effect, after homing all axis's of course. Weird. Thanks all. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Try to value useful qualities in one who loves you. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
