Bugs item #3566952, was opened at 2012-09-12 01:25 Message generated for change (Tracker Item Submitted) made by voidexp You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3566952&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Stepconf Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Ivan Nikolaev (voidexp) Assigned to: Jeff Epler (jepler) Summary: Spindle not working on fresh new PNCConf configuration (2.6) Initial Comment: Info about my system: Debian Squeeze, Linux 2.6.32.11-rtai x86_64 running on Intel Atom board. Mesa 7i43 anything I/O board connected through a parallel port LinuxCNC 2.6.0~pre (got from git, don't remember the commit) Machine: 4 identical stepper motors, drives are obviously controlled by the Mesa board. I did the following: 1) created a 3 axis and 1 spindle configuration with PNCConf. 2) tested the XYZ axes with an oscilloscope, the signal is excellent, timings are set up well 3) when tried to test the spindle, it seemed that nothing works. AXIS just checks the "brake" checkbox and on oscilloscope I did not see any signal, even a noise. 4) after spending lot of time on IRC and trying to do various setups, I just downgraded to LinuxCNC 2.5.1 stable. Everything worked, excellent signal on spindle pins. Below are links to INI and HAL files generated by PNCConf (2.6.0~pre version) and to a screen capture of what I did and how AXIS behaved on non-working configuration (5mb only). HAL file: http://pastebin.com/qwVQAY0e INI file: http://pastebin.com/kw4JmJmp Screen record: http://www.mediafire.com/?c8psfc8prfq0ta8 ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3566952&group_id=6744 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
