On Tue, 18 Jun 2013, John Kasunich wrote: > Date: Tue, 18 Jun 2013 12:35:52 -0400 > From: John Kasunich <jmkasun...@fastmail.fm> > Reply-To: EMC developers <emc-developers@lists.sourceforge.net> > To: emc-developers@lists.sourceforge.net > Subject: Re: [Emc-developers] 7I39HV question > > > > On Tue, Jun 18, 2013, at 12:19 PM, Peter C. Wallace wrote: >> >> I was going to ship some stuff to MPM to avoid that hassle (If this is OK >> with >> Stuart) I can include a 7I39LV if you want to try lower voltage more peak >> current. Any other cards, just ask > > More current means more torque, but since I'm going to > be running the motor with no load on the shaft that shouldn't > matter. In this testing the only thing torque will be used for > is rapid accel/decel. > > I believe the HV board can run the motor to its rated > current anyway, so more isn't better. > > -- > John Kasunich > jmkasun...@fastmail.fm
More isn't better? that sounds un-American to me. > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
