Hello.
I have an i.MX6-based ARM board. I try to build basic linuxcnc to it, that
branch: git://git.mah.priv.at/emc2-dev.git linuxcnc-rtos
So I disable everything (--disable-gtk --disable-python --without-x
--disable-build-documentation --disable-drivers); was it a good idea or
something from that list must be enabled no matter what? And enable
simulator mode to run with a standart linux kernel.
I have the following errors:
Compiling libnml/nml/stat_msg.cc
Compiling libnml/linklist/linklist.cc
Compiling rtapi/sim_rtapi_app.cc
In file included from rtapi/rtapi.h:214:0,
from rtapi/sim_rtapi_app.cc:40:
rtapi/rtapi_bitops.h:297:2: error: #error The header file <asm/bitops.h> is
not usable and rtapi does not yet have support for your CPU
Compiling rtapi/sim_rtapi.c
Compiling rtapi/test_rtapi_vsnprintf.c
In file included from rtapi/rtapi.h:214:0,
from rtapi/sim_rtapi.c:23:
rtapi/rtapi_bitops.h:297:2: error: #error The header file <asm/bitops.h> is
not usable and rtapi does not yet have support for your CPUIn file included
from rtapi/rtapi.h:214:0,
from rtapi/test_rtapi_vsnprintf.c:1:
rtapi/rtapi_bitops.h:297:2: error: #error The header file <asm/bitops.h> is
not usable and rtapi does not yet have support for your CPU
In file included from rtapi/sim_rtapi.c:23:0:
rtapi/rtapi.h: In function 'rtapi_mutex_give':
rtapi/rtapi.h:231:2: warning: implicit declaration of function
'test_and_clear_bit' [-Wimplicit-function-declaration]
rtapi/rtapi.h: In function 'rtapi_mutex_try':
rtapi/rtapi.h:243:2: warning: implicit declaration of function
'test_and_set_bit' [-Wimplicit-function-declaration]
In file included from rtapi/test_rtapi_vsnprintf.c:1:0:
rtapi/rtapi.h: In function 'rtapi_mutex_give':
rtapi/rtapi.h:231:2: warning: implicit declaration of function
'test_and_clear_bit' [-Wimplicit-function-declaration]
rtapi/rtapi.h: In function 'rtapi_mutex_try':
rtapi/rtapi.h:243:2: warning: implicit declaration of function
'test_and_set_bit' [-Wimplicit-function-declaration]
In file included from rtapi/sim_rtapi.c:381:0:
./rtapi/sim_common.h: At top level:
./rtapi/sim_common.h:220:2: warning: #warning No implementation of
rtapi_get_clocks available [-Wcpp]
make[1]: *** [objects/rtapi/sim_rtapi.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [objects/rtapi/test_rtapi_vsnprintf.o] Error 1
In file included from rtapi/sim_rtapi_app.cc:40:0:
rtapi/rtapi.h: In function 'void rtapi_mutex_give(long unsigned int*)':
rtapi/rtapi.h:231:29: error: 'test_and_clear_bit' was not declared in this
scope
rtapi/rtapi.h: In function 'int rtapi_mutex_try(long unsigned int*)':
rtapi/rtapi.h:243:34: error: 'test_and_set_bit' was not declared in this
scope
rtapi/rtapi.h: In function 'void rtapi_mutex_get(long unsigned int*)':
rtapi/rtapi.h:252:34: error: 'test_and_set_bit' was not declared in this
scope
make[1]: *** [objects/rtapi/sim_rtapi_app.o] Error 1
make[1]: Leaving directory
`/home/meequz/src/OSELAS.BSP/platform-mx6/build-target/linuxcnc-2.5.2/src'
make: *** [/home/meequz/src/OSELAS.BSP/platform-mx6/state/linuxcnc.compile]
Error 2
make: *** No targets specified and no makefile found. Stop.
The software is a ptxdist (
http://www.pengutronix.de/software/ptxdist/index_en.html) as an embedded
distro and OSELAS Toolchain (
http://www.pengutronix.com/oselas/toolchain/index_en.html) as a cross
toolchain.
I have read that its possible to migrate from asm-bitops to bitops
implemented in gcc. How can I do that?
'linuxcnc-2.5.2' in the end of the log is only a direcory name, not really
2.5.2 version. The VERSION file inside contains a line '2.6.0~pre'.
If you need all configure and make log, let me know.
--
з павагай,
meequz
regards,
meequz
------------------------------------------------------------------------------
Introducing Performance Central, a new site from SourceForge and
AppDynamics. Performance Central is your source for news, insights,
analysis and resources for efficient Application Performance Management.
Visit us today!
http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
