Seb, I don't see any errors on the build (if I clicked in the right place to look) so I must have fixed it.
JT On 11/22/2013 10:11 AM, Sebastian Kuzminsky wrote: > On 11/22/13 05:09 , John Thornton wrote: >> Just looking at the 2.6 To Do list and discovered a few document items. >> >> both gcode/overview and gcode/machining_center define the parameter file >> format. Unify/simplify. >> >> The machining center describes what parameters are and G code overview >> describes the same thing plus the actual parameters. >> >> After reading the machining center some it does not cover anything that >> is other sections of the manual so I wonder if we even need it at all? > Thanks for looking at this John. > > >> I'll try and find the errors in the Spanish and French docs. > Here are the most recent docs build warnings from master: > > http://buildbot.linuxcnc.org/buildbot/builders/docs/builds/1159/steps/compile/logs/warnings%20%2810%29 > > I know what's wrong with the linuxcnc.1 manpage being missing, i broke > that a little while ago and I'll fix it. It actually does get built, > but by the wrong make target. > > ------------------------------------------------------------------------------ Shape the Mobile Experience: Free Subscription Software experts and developers: Be at the forefront of tech innovation. Intel(R) Software Adrenaline delivers strategic insight and game-changing conversations that shape the rapidly evolving mobile landscape. Sign up now. http://pubads.g.doubleclick.net/gampad/clk?id=63431311&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
