ok - It looks like it only works for simulator. (I built and ran simulator and I get a ton more output to terminal.) I will run it this way and see if I get the jump.
one more issue - linuxcnc ~/linuxcnc-dev/configs/sim/axis/axis.ini > test.log When I do that - all I get is the bootup of linuxcnc in the log file. Everything else goes back to the terminal.. sam c On 12/5/2013 8:03 AM, Robert Ellenberg wrote: > Sorry, I wasn't clear on that last part. Instead of (configuration file > optional), put the path to your configuration file: > > For example: > > linuxcnc ~/linuxcnc-dev/configs/sim/axis/axis.ini > test.log > > Rob > ------------------------------------------------------------------------------ > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > > ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
