Any 3d printed file will divide up curves into short line segments. Here's an example...
www.franksworkshop.com.au/img_bin/tux.zip There's a few 3d printer M-Codes you may need to remove. > -----Original Message----- > From: Robert Ellenberg [mailto:[email protected]] > Sent: Friday, 6 December 2013 11:47 AM > To: EMC developers; Enhanced Machine Controller (EMC) > Subject: [Emc-developers] "Slow" G code > > Hi All, > > As some of you know already, I'm working on an improvement to the > linuxcnc trajectory planner that will allow much faster movement for > engraving-type programs with lots of short segments. As part of this effort, I > need test cases, both to find rare errors, and to estimate performance > improvements. > > If you'd like to contribute to this effort, I'm looking for G-code that runs > slower than the requested feed rate. In particular, I'm looking for programs > that have lots of short segments that approximate smooth paths. If you have > a program that you think should run faster and are willing to share it, please > email it to me. While my fixes won't improve every issue, part of my goal > here is to survey how common some problems are. If it turns out that a > slowdown I consider rare is common in your programs, it will justify some > additional work in that direction. > > Thanks! > Rob > ---------------------------------------------------------------------------- -- > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.cl > ktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
