On Feb 6 2014 5:53 AM, andy pugh wrote: > On 6 February 2014 09:27, Robert Ellenberg <[email protected]> wrote: > >> Is there a standard way to treat blends between rapid moves and >> regular >> feed moves? > > I don't know if there is a standard way, but I think I would normally > expect there to be no blending between G0 and G1. ie, exact-stop mode > to be active.
You are likely correct here. > (If the G0 to G1 transition is in contact with the workpiece > something > is wrong anyway). Not quite. Picture a straight plunge cut -- you can go in at speed, and then retract at rapid. I see nothing wrong with that, and if there is a reason that must retract at speed instead of rapid I would like to hear the rationale. EBo -- ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
