Hi LinuxCNC Documentors!

I just noticed a broken link in one of our git docs, which was
distressing because i though i had fixed our docs buildsystem to flag
any broken links.

Turns out the w3c's checklink program that we use doesn't work the way i
thought it worked, and i was using it in a way that missed some broken
links.

I just pushed a commit to master that should flag any broken (internal)
links in our docs, it's trundling it's way through the buildbot now, and
should report the broken links within an hour or two.  If you're too
excited about fixing this to wait, I've attached all the broken links.

There's problems with all three languages; English, French, and Spanish.

I'd love your help to fix these problems.


-- 
Sebastian Kuzminsky
Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/gcode.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/gcode.html
  Line: 2440
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:Path-Control-Mode           Line: 2440

Processing      
file:///home/seb/linuxcnc.git/docs/html/gcode/machining_center.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/machining_center.html
  Line: 340
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:Tool-Table-Format           Line: 340

Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/overview.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/overview.html
 Lines: 320, 1325, 2295
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sub:Binary-Operators            Line: 320
        sec:Subroutine-return-values    Line: 1325
        cap:format-parameter-file       Line: 2295

Processing      
file:///home/seb/linuxcnc.git/docs/html/gcode/tool_compensation.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/tool_compensation.html
  Line: 334
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        cha:Lathe-Specifics             Line: 334
Can't check links: Content-Type for 
<file:///home/seb/linuxcnc.git/src/.htmldoc-stamp> is 'text/plain'.
***
*** warning: bad links found in English docs!
*** oh well, continuing anyway
***

Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/gcode_fr.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/gcode_fr.html
 Lines: 272, 284, 337, 389, 1553, 1672
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:G90-G91-Set                 Lines: 272, 337, 389, 1553, 1672
        sec:G92_1-G92-2                 Line: 284

Processing      
file:///home/seb/linuxcnc.git/docs/html/gcode/machining_center_fr.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/machining_center_fr.html
  Line: 181
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:G93-G94-G95-Set             Line: 181

Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/other-code_fr.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/other-code_fr.html
  Line: 40
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:G93-G94-G95-Set             Line: 40
Can't check links: Content-Type for 
<file:///home/seb/linuxcnc.git/src/.htmldoc-stamp> is 'text/plain'.
***
*** warning: bad links found in French docs!
*** oh well, continuing anyway
***

Processing      
file:///home/seb/linuxcnc.git/docs/html/common/User_Concepts_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/common/User_Concepts_es.html
  Line: 220
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        feed-rate                       Line: 220

Processing      
file:///home/seb/linuxcnc.git/docs/html/common/user_intro_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/common/user_intro_es.html
  Line: 113
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        cha:touchy-gui                  Line: 113

Processing      file:///home/seb/linuxcnc.git/docs/html/config/emc2hal_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/config/emc2hal_es.html
  Line: 664
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        motion                          Line: 664

Processing      
file:///home/seb/linuxcnc.git/docs/html/config/ini_config_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/config/ini_config_es.html
  Line: 136
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sub:[TRAJ]-section              Line: 136

Processing      file:///home/seb/linuxcnc.git/docs/html/config/stepconf_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/config/stepconf_es.html
 Lines: 461, 462
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        finding-maximum-acceleration    Line: 462
        finding-maximum-velocity        Line: 461

Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/gcode_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/gcode_es.html
 Lines: 99, 191, 267
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:G90-G91-Set                 Line: 267
        sec:G0-Rapid                    Line: 99
        sec:G43-G43.1-Tool              Line: 191

Processing      
file:///home/seb/linuxcnc.git/docs/html/gcode/machining_center_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/machining_center_es.html
  Line: 340
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:Tool-Table-Format           Line: 340

Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/m-code_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/m-code_es.html
 Lines: 57, 77, 81, 105
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sec:M30-M60                     Line: 57
        sec:M62-to-M65                  Line: 105
        sec:M49-Neither-Override        Line: 81
        sec:M48-Both-Override           Line: 77

Processing      file:///home/seb/linuxcnc.git/docs/html/gcode/overview_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/overview_es.html
  Line: 313
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        sub:Binary-Operators            Line: 313

Processing      
file:///home/seb/linuxcnc.git/docs/html/gcode/tool_compensation_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gcode/tool_compensation_es.html
  Line: 331
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        cha:Lathe-Specifics             Line: 331

Processing      file:///home/seb/linuxcnc.git/docs/html/gui/gladevcp_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/gui/gladevcp_es.html
 Lines: 611, 612, 620, 627, 633
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        gladevcp:HAL_HBar               Line: 620
        gladevcp:HAL_HBox               Line: 633
        gladevcp:HAL_RadioButton        Line: 612
        gladevcp:HAL_HScale             Line: 627
        gladevcp:HAL_Button             Line: 611

Processing      
file:///home/seb/linuxcnc.git/docs/html/hal/canonical-devices_es.html

List of duplicate and empty anchors
        cha:Canonical-Device-Interfaces Lines: 7, 19

Processing      file:///home/seb/linuxcnc.git/docs/html/hal/intro_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/hal/intro_es.html
  Line: 111
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        fig:Remote-Start-Example        Line: 111

Processing      file:///home/seb/linuxcnc.git/docs/html/hal/rtcomps_es.html

List of duplicate and empty anchors
        fig:Stepgen-Block-Diag  Lines: 47, 57

Processing      
file:///home/seb/linuxcnc.git/docs/html/quickstart/stepper_quickstart_es.html


List of broken links and other issues:
file:///home/seb/linuxcnc.git/docs/html/quickstart/stepper_quickstart_es.html
 Lines: 45, 65
  Code: 200 (no message)
 To do: Some of the links to this resource point to broken URI fragments
        (such as index.html#fragment).
The following fragments need to be fixed:
        latency-test                    Line: 45
        stepconf-wizard                 Line: 65
Can't check links: Content-Type for 
<file:///home/seb/linuxcnc.git/src/.htmldoc-stamp> is 'text/plain'.
***
*** warning: bad links found in Spanish docs!
*** oh well, continuing anyway
***
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/13534_NeoTech
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

Reply via email to