On 04/10/2014 11:33 AM, Chris Radek wrote: > On Thu, Apr 10, 2014 at 10:57:42AM -0500, Jon Elson wrote: >> (Mostly I'm going to merge the xxx_motion.hal and xxx_servo.hal >> files, there is no rational reason for how these were split up. >> Also, I will get rid of as much of the newsig/linksp code as >> possible in favor of net commands.) > This sounds like it would be best done in 2.6. At this stage in the > 2.5 release cycle, only carefully-considered bugfixes and other very > minor and safe changes are appropriate. > Well, if I test it to eliminate any stupid typos that prevent LinuxCNC from starting, I don't think there's much risk. But, since it all WORKS, there's no real need to do this. I'm just trying to tidy things up for those who have to edit the sample configs. >> And, I'll also put in a velocity estimation version for the PPMC. > This sounds like a minimal and appropriate change - probably only a > line or two, right? Well, one line to enable the feature in the driver, and one line to link the signals for each axis. I will do this one, then, as it creates a new config rather than changing an existing one. > > The release will come from the tip of v2.5_branch > > Some instructions that might help, here: > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC#Getting_the_source_with_git > > If you need more help, maybe join us in irc? > > Oh, I think just knowing where to get the branch from is all I need.
Thanks, Jon ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
