On 07/13/2014 11:32 AM, andy pugh wrote: > I seem to get this message moderately frequently. > I can bypass it by hitting the "quill up" button connected to Touchy, > then pressing "start" again. > > I think it is somehow linked to having quill-up on tool-change set in the INI.
When do you get that message? The rest of your email makes me think it happens on M6. I use [EMCIO]TOOL_CHANGE_QUILL_UP (and TOOL_CHANGE_AT_G30), and i've never gotten that error on a tool change. It might help that my [AXIS_2]MAX_LIMIT is 0.000001, i see that the docs for TOOL_CHANGE_QUILL_UP say "This is the same as issuing a G0 G53 Z0.". Maybe your Z max limit is 0 and you're running in to some weird floating-point rounding error? Are you using any of the other [EMCIO]TOOL_* options? > (It is also strange that you get the quill-up even if the selected > tool is already loaded) This is so that after an M6 you're always in a well-defined position. It could be bad if your program performed different motions depending on what tool was loaded when it started. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
