vendor id's are correct 10ce:eb70
On 6 August 2014 16:16, Sebastian Kuzminsky <[email protected]> wrote: > On 8/6/14 9:09 AM, Dewey Garrett wrote: > > > > I tested on wheezy using a buildbot deb > linuxcnc_2.6.1.1.gf0c9384_i386.deb > > (instead of the iso) and see: > > > > $ lsb_release -rc > > Release: 7.6 > > Codename: wheezy > > > > $ uname -a > > Linux debian-shop2 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian > 3.4.55-3linuxcnc i686 GNU/Linux > > > > $ cat /etc/udev/rules.d/90-xhc.rules > > # xhc-hb04 mpg pendant > > ATTR{idProduct}=="eb70", ATTR{idVendor}=="10ce", MODE="666", > OWNER="root", GROUP="users" > > > > as expected. > > ------------------------------------------------------------------------- > > > > The error i see starting xhc-hb04 is: > > > > [ 1.002037] [00001227] libusbx: error [op_open] libusbx couldn't open > USB device /dev/bus/usb/007/002: Permission denied. > > [ 1.002080] [00001227] libusbx: error [op_open] libusbx requires write > access to USB device nodes. > > ------------------------------------------------------------------------- > > > > looking at the permissions i see: > > $ ls -l /dev/bus/usb/007/002 > > crw-rw-r-T 1 root users 189, 769 Aug 6 07:46 /dev/bus/usb/007/002 > > ------------------------------------------------------------------------- > > so MODE="666" was not honored > > > > if i change with > > $ sudo chmod 777 /dev/bus/usb/007/002, perms are ok > > ------------------------------------------------------------------------- > > maybe this will help a debian packaging expert > > This is exemplary debugging info, thanks Dewey. > > Please send the output of "lsusb" (with the pendant plugged in), to see > if the product and vendor ids are as expected. > > Also send the output of, um, "udevadm monitor" with all the right flags > that i dont know, while plugging in the pendant, to see why the rule > isn't getting run right. > > > -- > Sebastian Kuzminsky > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
