I think the only place that this could cause a problem, ( and I may be mistaken, and way ahead of things/myself ) is if it is not an INI Option/Switch, in the event that "Jog While Paused" comes to fruition, having the ability to override the return to cut/position.
Obviously this is a long ways off, if ever, but under that scenario, it would be of a benefit to be able to, when it is returning into/onto the part, be able to override it down to whatever is needed, that way when, say you had to pull out for a broken insert, you would not go flying back into a big lump crap in the bottom of a bore, or on the OD of the part. And as I said, I may be mistaken, the return back to position/cut may not be a jog rate, but a feed rate instead, so this would not matter anyway then. All I ask is that this be an option in the INI, so we have the choice of whether or not to have this feature Thanks Rick ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers