Sure, I attached the code. Thanks!
2015-03-09 15:26 GMT+02:00 sam sokolik <sa...@empirescreen.com>: > Do you have a gcode snippet that would show this? > > thanks > sam > > On 3/9/2015 8:12 AM, Andrew wrote: > > Hello, > > > > I found this bug a couple of months back and it hasn't disappeared since. > > Sim-lathe slows down on G2 G3 arcs. Say, the feed is 140mm/min, it moves > > 140 on the lines and it's limited to 60 on arcs. Exactly 60 mm/min. Feed > > override is ignored on arcs, but works for lines. > > G94, G95, G96, G97 doesn't change anything. > > Both new and old TP. > > It works normal in 2.6.7, but fails in 2.7 and master. > > G18 is active, might be the key? > > > -- Andrew
lathe-arc.ngc
Description: Binary data
------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers