On Friday 03 July 2015 20:15:51 Tom Easterday wrote: > I am trying to do threading on a lathe using the NGCGUI g76.ngc > routine. Other operations, facing, turning are working in NGCGUI. > When I get to the G76 line in the code (was stepping through it in > Axis) it just stops and sits there. The only reason I can see for it > stopping is that my plane changes to G17 (from G18 which is set in the > g76.ngc routine) for no apparent reason. The spindle turns, but there > is no further movement. I believe I have correct values for every G76 > parameter and everything else is fine. I have no explanation for why > the plane changes to G17 - there is no such command in the .ngc file. > I see in the release notes for the various 2.7.X releases that in > 2.7.0~pre5 this was done: fix velocity & acceleration values on > non-G17 arcs > I wonder if this could have messed something up, or if there is some > other bug in 2.7.0~pre6. Any ideas? > > -Tom
Verify, with a scope, that you have a valid index pulse Tom. If its missing, it will sit there forever as that is its start this stroke signal. > > > ---------------------------------------------------------------------- >-------- Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
