Bummer. Sounds like it is a dead end going forward, although should have several years of relevancy.
Does anyone have any use/success stories about Coreboot and linuxcnc? Brian On Nov 17, 2015, at 9:54 PM, bari <[email protected]> wrote: > I've been working with coreboot since it was still a concept called > LinuxBIOS in the late 90's. It's true that you can use it to create > firmware for your cpu and chipset to replace the BIOS and have it > optimized for low latency. The problem is that Intel was never in > support of it and AMD announced last year that they were dropping > support for open firmware (open AGESA). So the only new chipsets and > cpu's that get coreboot support are those used by Google in their > chromebook products. There are some older cpu/apu's that are supported > and still in existence but they are a few years old now. > > -Bari > > On 11/17/2015 08:25 PM, Brian wrote: >> I recently became aware of Coreboot.org. After some searching, it appears >> it has been occasionally mentioned on IRC and the forums, so, its nothing >> new to the LinuxCNC community. It would seem to me this would be a good >> solution to optimizing latency and ensure consistent performance on known >> hardware. It also appears it hasn't gained much attention in the LinuxCNC >> community, so I wanted to hear what the latest thoughts are regarding it. >> >> So, who knows anything about it, and has anyone had any experience or >> results using it? >> >> Brian >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
