On 05/15/2016 07:06 PM, sam sokolik wrote: > as far as I know - the component time is in clock cycles - not us... > > OK, so then maybe this was not overrunning the servo thread, just running a lot longer than normal. Normal seems to be 250,000 or so, and it was running 1,300,000 when I was seeing the problem. That would maybe be taking about 500 us for that one component to execute, extrapolating from prior measurements.
That oddity just went away after trying a few different combinations of boards and firmware. So far, I've been running about 2 hours and the jumping coordinate problem has not showed up again. (Knock on wood...) Jon ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
