On Tuesday 12 July 2016 10:57:12 Gene Heskett wrote:
> On Tuesday 12 July 2016 10:23:53 Jeff Epler wrote:
> > andy,
> >
> > try putting a commented-out [HALUI] section in a file that doesn't
> > otherwise have one..
> >
> > #[HALUI]
> > #oops = true
>
> And I have 2 such entries, the first one with a # in front of it.
So the next Q then, is do I have to completely nuke the commented session
I am retaining in case camview or something like it becomes linuxcnc
compatible again?
For that matter I could nuke both, because as of about 2.5 years ago,
even the second method fails, so all its MDI commands are commented out.
Its frustrating, and I guess it shows here.
Why is it that anytime someone manages to make a camera work with
linuxcnc, some change in the next few months kills it? I would think
that between that and the align.gz kit of code, its use would get a
higher priority as well done, you could remove a part from the table, go
test fit it, and if something needs additional trimming, go put it back
on the table and with 4 or 5 mouse clicks, re-orient the coordinate
system to match the old work, and resume work on the part in perfect
registration. And do it in 5% of the time one would have spent making a
jig to relocate it to your gcode.
I can't understand the lack of interest in such a facility.
I have a camera running on the G0704, but it must run on a separate
screen, and my questions about the _camon and _camoff are ignored?
_camon will run the machine to the offsets configured, but when it gets
there, it turns around and comes back to the original position, and that
is NOT in the code I see in _camon.
> > I think this reproduces gene's reported error.
> >
> > I made this educated guess because 'copysection' doesn't anchor its
> > search for the section to the beginning of a line
> >
> > def copysection(block):
> > #Just makes a straight copy of blocks that don't need any
> > work regex = "\[%s\](.+?)(?:\n\[|$)" % block
> >
> > while all_sections does:
> >
> > all_sections = re.findall("^\[(.+)\]", inistring, re.MULTILINE)
> >
> > The code in copysection may also misbehave if there's a [ inside a
> > value:
> >
> > THINGS_I_LIKE = [HALUI]
Ouch, what a crappy search function. Even bash can do far better than
that albeit using some pretty old fashioned $LEFTS syntax.
> > Jeff
Sorry Jeff, a back thats needing constant pain meds, and the summer heat
is making me testy.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
