On Sunday 17 July 2016 15:42:55 Gene Heskett wrote: > On Sunday 17 July 2016 14:21:38 andy pugh wrote: > > On 17 July 2016 at 18:48, John Kasunich <[email protected]> wrote: > > > If the automatic updater made that change, that is a bug. > > > > The updater shouldn't be able to make a change like that, all it > > does is a slightly advanced copy/paste exercise on the HAL and INI > > files. > > When the little machine was converted, all I had left was the port > reset time of 2300 ns in the hal file. The old file was 2200 and ran > ok.
I just changed the base_thread back to 30,000 which appears to have made that work again, up to the max speed I actually allow in the planner. Thats about 12.75 IPM. So that fixed that until I put the 5i25 in it. Anybody have a spare round tuit? I won't say its hot in the shop building, but I took a bottle of that near beer (Miller64) I drink out and set it in front the the toy mills keyboard, then ground some off the back side of that internal threading tool and finished making the nut with the 27 tpi tapered thread. Reaching for that beer again, I swear it was doing a slow simmer. It was still wet though, which at that point is what counted. So now I have the lathe doing another all night job, making a 3/8 shaft out of a piece of 1/2" A2, so I can attach it to the front end of the crossfeed screw and have a connection to the handle on the front of the carriage on the sheldon. Using a dremel, spinning a 2" fiber disk so the front face is touching at about a 5 degree angle. rpms about 3500-4000 which the dremel should be able to do for a month or more. BUT!! I just discovered we have once again lost the ability to pile up several lines of code in the MDI buffer, discovered by my pre-entering the next command I wanted it to do when that one was finished. What happens is that the currently executing command is silently thrown away, and it instantly starts executing the new entry! Bad dog, no biscuit. Please put that back again. Its at least as handy as sliced bread. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
