Gentlemen, I have a 5 axis cutter diameter compensation routine working in my cam package. I am studying the LinuxCNC docs to figure out where/how to implement it. As of now it is not universally applicable. It is meant to work on a machine with the two axis head with the B axis carrying the A axis and the A axis carrying the spindle. Like the 5 axis blue cinci at MPM. The dropbox links are the program and two screen shots to help visualize what the program is doing. The parallel lines in the pictures are tool paths with different compensation values. Questions and/or comments are appreciated.
https://www.dropbox.com/s/xsl00ty9rpb4n20/4PointCalculations_visualize. geo?dl=0 https://www.dropbox.com/s/qpqw0ckfqnh7czb/4PointCalculations_visualize_ white.jpg?dl=0 https://www.dropbox.com/s/vlpo37h8tai8qk7/4PointCalculations_visualize_ black.jpg?dl=0 thanks Stuart -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
