On 03/29/2017 09:37 AM, Stuart Stevenson wrote: > Gentlemen, > This is connected to the G64 question I asked on the developers list > yesterday. > > G64 P0 does not change the positioning problem on the machine. > > Problem description: > desired machine motion > position XY with Z above the material/work level > move Z to material/work level > face mill top of material > > encountered machine motion > position XY with Z above the material/work level > result as expected > move Z to material/work level > result not as expected - as the tool approaches the final Z > position > the tool moves an amount > toward the final XY position > and cuts into the > material/stock > face mill top of material > result as expected > > Boy, this might be a case to refer to Robert Ellenberg, the author of the new trajectory planner. Do you have a G-code sample that you can send to him?
(I have to admit, I am NOT using 2.7 on my production machine. I do have it on the desktop machine I had with me at Helix.) Jon ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
