Hallo Chris, I just tested also with a simulated limit switch and as reported previously not all errors are reported. After I commented out GStat lines for error polling, I got the errors reported correctly.
So in deed it is caused by double polling errors. So we have to discus, if the error polling should be part og GStat, or the GUI's. If the developer list decide, it should belong to GStat, I will need to change some stuff in gmoccapy. By the way: Look in hal_glib.py line 559 in get_position It is using math.radians, but math is not imported, so if you use rotation, a exception is raised! I found that, because on my real machine I have a rotation on G57 and selecting that coordinate system kills linuxcnc / gmoccapy. Norbert Am 27.04.2017 um 19:36 schrieb Niemand Sonst: > Am 27.04.2017 um 05:11 schrieb Kurt Jacobson: >> Hello all, >> >> I am using the Python interface and have noticed recently that the error >> channel appears to catch errors only about 50% of the time. The errors get >> printed to the terminal but don't show up when polling the error channel. I >> did not have this problem when using 2.7, only since switching to 2.8, and >> I have not made any changes to that part of my UI code so I don't think the >> problem is in my code. Is it just me or is there a known problem here? >> >> Thanks, >> Kurt >> ------------------------------------------------------------------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> Emc-developers mailing list >> Emc-developers@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-developers >> > I have been reported,, that this happen also to gmoccapy. > > Unfortunately I am not able to reproduce that on my computer creating > errors on purpose, that ones are reported correctly. > > rodw reported about not reported errors after hitting a limit switch on > homing. > > > Norbert > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
