On Tuesday 15 August 2017 03:52:44 Gene Heskett wrote: > A long standing problem. I had this fixed 6 months ago, but it > appears one of the many many updates since has overwritten my changes. > > The terminal logs: > > gene@coyote:~/linuxcnc/nc_files$ linuxcnc -l > LINUXCNC - 2.8.0-pre1-3304-gc1affd5 > Machine configuration directory is > '/home/gene/linuxcnc/configs/sim.axis' Machine configuration file is > 'lathe.ini' > Starting LinuxCNC... > Found file(REL): ./core_sim.hal > Note: Using POSIX non-realtime > sched_setaffinity: Invalid argument > Found file(REL): ./axis_manualtoolchange.hal > Found file(REL): ./simulated_home.hal > Found file(REL): ./lathe.hal > note: MAXV max: 3.333 units/sec 200.000 units/min > note: LJOG max: 3.333 units/sec 200.000 units/min > note: LJOG default: 1.000 units/sec 60.000 units/min > note: jog_order='ZX' > note: jog_invert=set(['X']) > task: main loop took 0.072006 seconds > task: main loop took 0.090780 seconds > task: main loop took 0.032800 seconds > task: main loop took 0.052299 seconds > task: main loop took 0.056727 seconds > task: main loop took 0.042080 seconds > Can't run a program when not homed > task: main loop took 0.012902 seconds > task: main loop took 0.010219 seconds > task: main loop took 0.012279 seconds > task: main loop took 0.011872 seconds > Can't issue MDI command when not homed > Can't run a program when not homed > > But it has been homed twice, once before trying to run some code, and > once before trying a touch-off of Z. And the I'm homed target symbols > are present beside the RAD and Z in the axis dro display. > > A sim isn't real usefull when its blocked from running the code I just > ran last week in the real pi/lathe. > > Cheers, Gene Heskett
Ping! Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
