On Friday 25 May 2018 22:46:27 Gene Heskett wrote: > On Friday 25 May 2018 20:10:00 Gene Heskett wrote: > > Current that is at nominally 3 hours ago when I ran an update after > > being forced to reboot for the 2nd time in as many days because lcnc > > freezes. > > > > Its locking up and becoming totally unresponsive, even to a kill -9 > > from a root session of htop. The rest of the machine is running > > normal. And I can't find a thing in the logs. > > > > What should I set the ini files DEBUG= to to get the best record in > > the log the next time it happens. > > My proof reading stinks. "happens." was supposed to be "happens?" > > And thank you
Anyway, it has behaved itself today as I made 2 more finished hat assemblies. But I've learned a lesson about the side driving screw, put it in last, its impossible to drill past it without sucking the drill off center 10-30 thou. And I've got to make a support for the open end of the r8 I have chucked in the rotary table, drilling pressure is sufficient to knock the workpiece out of alignment. But I've rigged a prop under it that helps, so the job is generally getting done. Got 11 of them standing on the shelf so far. Some of the ER20 collet's, I have quite a pile of them now, are split to 8 slots, and some to 6. The 8 slot can be used to grab the butt of a tap, locking tightly enough to work. Add a battery powered impact tool with a 1/4" hex socket, an adapter to 1/4" square drive sockets with an 8 pt 5/15 socket, and a few hammers of its impact drive puts a lot better grip of a TTS style tool holder. Probably hell on the plastic gears in the g0704's head. Might have to locate some metal gear replacements eventually, but its sure working ok right now. And thats the days news from the Weston WV gossip fence. I gotta go to the store, I fed my lady the last of the high pulp OJ this morning. -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
