https://github.com/LinuxCNC/linuxcnc/blob/b948dba1af9e63f26498cf005d6693cec30458a9/src/emc/rs274ngc/interp_convert.cc#L3302
There seem to be a lot of things that are not allowed with cutter comp enabled, and it isn't immediately obvious why. The following G-codes are banned G61 - Seems reasonable G54, G55...G59.3 - OK M62 ... M68 Analog-digital IO -- This seems odd M48 - M53 - Spindle and feed overrides -- This also seems unreasonable G98 - G99 -- Cycle retract mode -- Again this seems an odd thing to disallow G76 lathe threading -- It seems like you might very much want to use cutter comp here? M6 tool change -- Why wouldn't cutter-comp just carry through with the new radius? G43 - G49 -- Might be reasnable, but doesn't seem necessary. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
