On Monday 10 June 2019 12:52:22 pm Gene Heskett wrote: > On Monday 10 June 2019 11:21:09 am Sebastian Kuzminsky wrote: > > On 6/10/19 8:55 AM, Gene Heskett wrote: > > > following the directions at: > > > <http://buildbot.linuxcnc.org/buildslave-admin-guide.html> > > > > > > And I get to this line: > > > > > > git clone git://git.linuxcnc.org/git/linuxcnc.git linuxcnc-dev > > > Cloning into 'linuxcnc-dev'... > > > fatal: unable to connect to git.linuxcnc.org: > > > git.linuxcnc.org: Name or service not known > > > > Ah yes, that LinuxCNC git url is pretty out of date. I updated it > > to the current one: > > > > git clone https://github.com/LinuxCNC/linuxcnc.git linuxcnc-dev > > Which is working, thank you. Except is is not, end each of the 4 times I've tried with: Resolving deltas: 100% (161375/161375), done. fatal: fsync error on '/media/slash/buildbot/linuxcnc-dev/.git/objects/pack/tmp_pack_dREvWb': Input/output error fatal: index-pack failed
With a different hash om tmp_pack_####### each time, and does not create or leave behind, a linuxcnc-dev directory. And once left /media/slash read only requiring a reboot. It is a 60GB SSD > > > > So I go one down the page and: > > > > > > gpg --keyserver hkp://keys.gnupg.net --recv-keys 25DD353196935D7D > > > 445B1785BC92B87F 26ADE41E54621DFA 0A30317D741499B0 > > > gpg: directory `/root/.gnupg' created > > > gpg: new configuration file `/root/.gnupg/gpg.conf' created > > > gpg: WARNING: options in `/root/.gnupg/gpg.conf' are not yet > > > active during this run > > > gpg: keyring `/root/.gnupg/secring.gpg' created > > > gpg: keyring `/root/.gnupg/pubring.gpg' created > > > gpg: requesting key 96935D7D from hkp server keys.gnupg.net > > > gpg: requesting key BC92B87F from hkp server keys.gnupg.net > > > gpg: requesting key 54621DFA from hkp server keys.gnupg.net > > > gpg: requesting key 741499B0 from hkp server keys.gnupg.net > > > gpgkeys: key 25DD353196935D7D can't be retrieved > > > gpgkeys: key 26ADE41E54621DFA can't be retrieved > > > gpg: /root/.gnupg/trustdb.gpg: trustdb created > > > gpg: key BC92B87F: public key "Chris Radek <[email protected]>" > > > imported gpg: key 741499B0: public key "LinuxCNC Release Manager > > > <[email protected]>" imported > > > gpg: no ultimately trusted keys found > > > gpg: Total number processed: 2 > > > gpg: imported: 2 (RSA: 1) > > > > All four of those keys fetched successfully for me from > > keys.gnupg.net, including the two that didn't work above. Not sure > > what's up with that. > > > > Also, i see that you're doing this all as root, that's probably not > > a good idea. The current buildbot runs everything as a special user > > named "buildslave". > > So am I. And I chowned the root of buildbot to buildslave and going > the git clone as that user. > > Should I do that as this user? > > Now the 64k$ question, does enough of that odroid you were using last > year survive to extract the config file it was running to build for an > armhf? If that could be shared by PM it might save me days. > > Thanks Sebastion. > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
