I have been working on a plasma config which is a complete configuration for a plasma cutter consisting of a component named plasmac.comp and configuration files for both Axis and Gmoccapy. It has been tested by several users and is at the stage where I think it could be incorporated into 2.9. It cannot be used in earlier versions as it uses the reverse run feature. At the moment I have the configurations in configs/by_machine/plasmac and I am not sure whether this is the correct place for them. I recently put in a PR which would also be nice to have committed otherwise I would need to make some changes to the plasmac Axis config. I have done a user guide in asciidoc but have just noticed that it is quite different in format to the LinuxCNC docs so I will need to rewrite that to suit. I am also unsure as to where this doc should go and how to incorporate it into the LinuxCNC docs.
Cheers, Phill. PR: https://github.com/LinuxCNC/linuxcnc/pull/606 <https://github.com/LinuxCNC/linuxcnc/pull/606> User Guide: https://github.com/phillc54/linuxcnc/blob/plasmac/configs/by_machine/plasmac/documents/plasmac/plasmac_user_guide.adoc <https://github.com/phillc54/linuxcnc/blob/plasmac/configs/by_machine/plasmac/documents/plasmac/plasmac_user_guide.adoc> _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
