Guys, The documentation Phill has produced is in asciidoc format
This was written at Andy's request. The intent was to have it in the section as per Lathe Users Information as he originally suggested. I think that is the right place as it not really about configuration which is where John suggests. Its really designed to give the user intending to use LinuxCNC to control a plasma table the information required and an understanding of the complexities of the task. I might add if I knew how complex it was and how immature Linuxcnc was in relation to plasma when I first started, I would have built another machine. I paid someone to produce some images so there is no possibility of digital rights violation. Many people have contributed to the content and a draft has been available on the forum for some time. It would have been nice to have received some feedback on the direction the documentation took earlier as it might have been able to incorporate that feedback at an early stage. Some headings are supported by separate HAL components that are not published to linuxcnc. If they were, this document could be more tightly linked to LinuxCNC. However, If we accept that Plasmac is now the official linuxcnc configuration for plamsa tables, then there is no point in publishing them as Phill has incorporated their functionality into Plasmac. Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Wed, 3 Jul 2019 at 04:35, andy pugh <bodge...@gmail.com> wrote: > On Tue, 2 Jul 2019 at 19:11, John Thornton <bjt...@gmail.com> wrote: > > > It's my humble opinion that documents that are not about LinuxCNC like > > the Integrators Information document should not be in the main LinuxCNC > > document as it is far too big now. > > > > I would suggest adding it as a separate document in the same manner as > > the Integrator Information document. > > It probably has the same status as the "Lathe Users Information" > section, in some ways. But maybe that is in the wrong place too. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
