On Thursday 11 July 2019 16:17:04 andy pugh wrote: > On Thu, 11 Jul 2019 at 07:32, Niemand Sonst <nie...@web.de> wrote: > > there is no need any more to depent on vte. > > Building an (RTA) deb package gives the following output: > > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/bin/classicladder were not linked against > libgio-2.0.so.0 (they use none of the library's symbols)
> dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/bin/classicladder were not linked against > libcairo.so.2 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/bin/classicladder were not linked against > libatk-1.0.so.0 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/bin/classicladder were not linked against > libpangoft2-1.0.so.0 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/bin/classicladder were not linked against > libgdk_pixbuf-2.0.so.0 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/lib/tcltk/linuxcnc/linuxcnc.so > debian/linuxcnc/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu >.so debian/linuxcnc/usr/lib/tcltk/linuxcnc/hal.so were not linked > against libXss.so.1 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/lib/tcltk/linuxcnc/linuxcnc.so > debian/linuxcnc/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu >.so debian/linuxcnc/usr/bin/classicladder > debian/linuxcnc/usr/lib/tcltk/linuxcnc/hal.so were not linked against > libfontconfig.so.1 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/bin/classicladder were not linked against > libpangocairo-1.0.so.0 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/lib/tcltk/linuxcnc/linuxcnc.so > debian/linuxcnc/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu >.so debian/linuxcnc/usr/lib/tcltk/linuxcnc/hal.so were not linked > against libXft.so.2 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/lib/tcltk/linuxcnc/linuxcnc.so > debian/linuxcnc/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu >.so debian/linuxcnc/usr/lib/tcltk/linuxcnc/hal.so were not linked > against libz.so.1 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/lib/tcltk/linuxcnc/linuxcnc.so > debian/linuxcnc/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu >.so debian/linuxcnc/usr/lib/tcltk/linuxcnc/hal.so were not linked > against libXext.so.6 (they use none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/panelui was not linked against libutil.so.1 > (it uses none of the library's symbols) > dpkg-shlibdeps: warning: package could avoid a useless dependency if > debian/linuxcnc/usr/bin/halmeter debian/linuxcnc/usr/bin/halscope > debian/linuxcnc/usr/lib/tcltk/linuxcnc/linuxcnc.so > debian/linuxcnc/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu >.so debian/linuxcnc/usr/bin/classicladder > debian/linuxcnc/usr/lib/tcltk/linuxcnc/hal.so were not linked against > libfreetype.so.6 (they use none of the library's symbols) Added some linefeeds to help the info content. I've not been aware there was such a linkage checker and I can see where its as usefull as the turnbutton lock on the outhouse door at a family reunion. Thanks for sharing that Andy. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
