Great, out of nowhere I'm getting these now: make[1]: Leaving directory '/usr/src/linux-headers-4.14.148-rtai-amd64' WARNING: "atan2" [/home/ntu/linuxcnc/src/scarakins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/scarakins.ko] undefined! WARNING: "acos" [/home/ntu/linuxcnc/src/rotarydeltakins.ko] undefined! WARNING: "fmax" [/home/ntu/linuxcnc/src/rotarydeltakins.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/rotarydeltakins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/rotarydeltakins.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/rosekins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/rosekins.ko] undefined! WARNING: "acos" [/home/ntu/linuxcnc/src/pumakins.ko] undefined! WARNING: "fmax" [/home/ntu/linuxcnc/src/pumakins.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/pumakins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/pumakins.ko] undefined! WARNING: "pow" [/home/ntu/linuxcnc/src/plasmac.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/plasmac.ko] undefined! WARNING: "floor" [/home/ntu/linuxcnc/src/plasmac.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/plasmac.ko] undefined! WARNING: "floor" [/home/ntu/linuxcnc/src/orient.ko] undefined! WARNING: "ceil" [/home/ntu/linuxcnc/src/orient.ko] undefined! WARNING: "acos" [/home/ntu/linuxcnc/src/motmod.ko] undefined! WARNING: "fmax" [/home/ntu/linuxcnc/src/motmod.ko] undefined! WARNING: "tan" [/home/ntu/linuxcnc/src/motmod.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/motmod.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/motmod.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/maxkins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/maxkins.ko] undefined! WARNING: "exp" [/home/ntu/linuxcnc/src/max31855.ko] undefined! WARNING: "pow" [/home/ntu/linuxcnc/src/max31855.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/lineardeltakins.ko] undefined! WARNING: "fmax" [/home/ntu/linuxcnc/src/limit3.ko] undefined! WARNING: "pow" [/home/ntu/linuxcnc/src/joyhandle.ko] undefined! WARNING: "floor" [/home/ntu/linuxcnc/src/ilowpass.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/hypot.ko] undefined! WARNING: "floor" [/home/ntu/linuxcnc/src/hostmot2.ko] undefined! WARNING: "acos" [/home/ntu/linuxcnc/src/genserkins.ko] undefined! WARNING: "asin" [/home/ntu/linuxcnc/src/genserkins.ko] undefined! WARNING: "pow" [/home/ntu/linuxcnc/src/genserkins.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/genserkins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/genserkins.ko] undefined! WARNING: "acos" [/home/ntu/linuxcnc/src/genhexkins.ko] undefined! WARNING: "fmax" [/home/ntu/linuxcnc/src/genhexkins.ko] undefined! WARNING: "asin" [/home/ntu/linuxcnc/src/genhexkins.ko] undefined! WARNING: "atan2" [/home/ntu/linuxcnc/src/genhexkins.ko] undefined! WARNING: "sqrt" [/home/ntu/linuxcnc/src/genhexkins.ko] undefined! WARNING: "fmod" [/home/ntu/linuxcnc/src/eoffset_per_angle.ko] undefined! WARNING: "floor" [/home/ntu/linuxcnc/src/bldc.ko] undefined! WARNING: "fabs" [/home/ntu/linuxcnc/src/axistest.ko] undefined! Regardless if built-ins are being used or not. Have to debug and figure out what's going on. This was working before.
Alec _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
