No. I remember having sizing issues with all of my tweaks, and ended up hard coding a lot of fields to make it look ok on my screen (10" 1920x1200). The buttons are a little bigger than fingertip size, but spaced far enough apart to not hit the wrong one.
-----Original Message----- From: John Thornton [mailto:j...@gnipsel.com] Sent: Thursday, 27 February 2020 10:35 AM To: emc-developers@lists.sourceforge.net Subject: Re: [Emc-developers] Touchy Tweak? That is a good idea! Did you get a touch screen sized buttons on your popup? JT On 2/26/2020 3:16 PM, Frank Tkalcevic wrote: > I did that on my version of touchy. The shutdown button pops up a dialog and gives 3 options - shutdown, restart, or close (and cancel the dialog). They just exit touchy and return 0,1 or 2 to the calling script (to do a clean linuxcnc exit). The script then executes the shutdown or restart. > > > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: Wednesday, 26 February 2020 11:57 PM > To: EMC developers > Subject: [Emc-developers] Touchy Tweak? > > I use Touchy on my lathe and Mill. > I find it fiddly to shut down the PC / System using the touch-screen. > Noting an unused space on the Startup page of the GUI, I am wondering if it > is worth considering adding a shut-down button (probably with a yes/no > dialog to make sure) > > Thoughts? > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
