On Monday 13 April 2020 20:05:48 Gene Heskett wrote:
> On Monday 13 April 2020 18:46:17 andy pugh wrote:
> > On Mon, 13 Apr 2020 at 22:53, Gene Heskett <[email protected]>
>
> wrote:
> > > when edited as shown on page 3 of this post it will not take a
> > > save, its ghosted out.
> >
> > _What_ is ghosted out?
>
> The save button in the synaptics editor. But now I learn how to get
> around that and do some updating, but the only thing update was 230+
> tde files to bring it up to a full R14.0.8 state, but I was able to
> get all of the dpkg-check-builddeps loaded. So it might build, maybe.
> Its working its way slowly thru the latex stuffs now.
>
> > Post 3 would be what you would use in a text editor. If that won't
> > save then maybe you need sudo?
>
> This was using synaptics own editor in a sudo root session of
> synaptics. I came to the conclusion it was busted and finally used
> nano.
>
> > (and, also, the forum software had swallowed the URLs and
> > abbreviated)
>
> I eventually got that this figured out. and its in the process on
> building master now. Which I assume will fail at some point prior to
> runtests. Perhaps even with an enlightening error msg. But next I
> need to read up on "git bisect" so I can start it before the 2.8 merge
> began. It worked fine till then, but its quite likely that I have the
> single, most complex hal files in existence.
>
> I tried canceling twopass but that made no diffs. I've spent days
> auditing the code looking for something as stupid as an axis letter
> typu. No luck. So I guess a bisect is next. runtests is working now.
> If thats clean, make debs and dpkg -i. test. But first, if Dee has
> awakened, put on my chefs hat and see about dinner at its 20:00 on
> this side of the pond. I laid out some pork steaks a while back,
> should be about thawed by now. And tomorrow is another day. Go spend
> 2G's on a lawnmower, a husky with a hydrostatic drive. I can't find
> the cat hunting in the back yard, weeds are already tall enough to
> hide him.
>
Now, it finished but built more than it did for the rpi4b, I had to
reduce the package count until it did install, but now refuses to load.
Some of the errors returned by linuxcnc -l are:
gene@GO704:/media/linuxcnc/gene$ linuxcnc -l
LINUXCNC - 2.9.0~pre0
Machine configuration directory
is '/home/gene/linuxcnc/configs/GO704-5i25-7i76'
Machine configuration file is 'GO704-5i25-7i76.ini'
Starting LinuxCNC...
Error: could not insert
module /usr/realtime-3.4-9-rtai-686-pae/modules/rtai_hal.ko: File exists
Realtime system did not load
Shutting down and cleaning up LinuxCNC...
Running HAL shutdown script
Error: Module hal_lib is in use by: abs not or2 pid and2 boot comp lut5
near mux2 mux4 sum2 xor2 conv_u32_float trivkins scale timedelay select8
charge_pump debounce invert hostmot2 conv_bit_u32 limit2 limit3 motmod
hm2_pci conv_float_s32 sample_hold oneshot flipflop conv_s32_float
Error: Module rtapi is in use by: abs not or2 pid and2 boot comp lut5
near mux2 mux4 sum2 xor2 conv_u32_float trivkins scale timedelay select8
charge_pump debounce invert hostmot2 conv_bit_u32 limit2 limit3 hal_lib
motmod hm2_pci conv_float_s32 sample_hold oneshot flipflop
conv_s32_float
Error: Module rtai_math is in use by: hostmot2
Error: Module rtai_sched is in use by: rtapi
Error: Module rtai_hal is in use by: rtapi rtai_sched
LinuxCNC terminated with an error. You can find more information in the
log:
/home/gene/linuxcnc_debug.txt
and
/home/gene/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
How do I mediate this?
>
> Cheers, Gene Heskett
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
