Thx andy, Mr Nelson has done a lot of work on this.
but I see last entries dated mid May 2020.
So, not really old, but not the every 2 week images that were the norm.
see:
https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit
this tidbit maybe of interest
"""The 3.8 kernel version image is recommended as a starting point.
bone-debian-8.7-machinekit-armhf-2017-02-12-4gb.img.xz
This uses a xenomai kernel and is pretty much guaranteed to work without
any adjustment of configs etc.
""" there are newer non-xenomai at the above url
Yet, for all the interest in BBx and the poor video of same,
I never saw the holy grail that seperates gui and rt-control.
did I miss it?
In any case, thanks to Michael, Charles, Robert and MXmaster, all who
worked hard for cnc for the masses.
thx
tomp
On 4/1/21 9:51 PM, Jon Elson wrote:
Beagle Bone, Robert C. Nelson
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
