Thanks Rainer, I personally do exclusively use open-source software. Freecad is enough to do the rough part, if it comes to details, I do hand coding.
Linux here in Peru is still a step child, everybody uses cracked versions of all sort of commercial software. However, this specific customer uses Fusion 360 with a legal license, and I've reconfigured it to produce the code that machine needs. High precision in that case is not needed, however the machine sticks to 0.02mm if not chattering at very long Z stick-outs like in the end of the video while retracting from the holes. Ju ________________________________ From: [email protected] <[email protected]> Sent: Thursday, October 28, 2021 8:19 AM To: [email protected] <[email protected]> Subject: Emc-developers Digest, Vol 186, Issue 32 Send Emc-developers mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/emc-developers or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of Emc-developers digest..." Today's Topics: 1. partial success on 5 Axis Router (Juergen Gnoss) 2. Re: partial success on 5 Axis Router (Rainer Stelzer) ---------------------------------------------------------------------- Message: 1 Date: Thu, 28 Oct 2021 02:41:55 +0000 From: Juergen Gnoss <[email protected]> To: "[email protected]" <[email protected]> Subject: [Emc-developers] partial success on 5 Axis Router Message-ID: <byapr06mb39608d1392f171cff7bdbfc7c3...@byapr06mb3960.namprd06.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" for the curious https://www.youtube.com/watch?v=jkAgMhvbEjw still fighting the change from TCP to idendity mode, but so far, I'm happy. Thanks to all the folks working on LinuxCNC. ------------------------------ Message: 2 Date: Thu, 28 Oct 2021 13:38:29 +0200 From: Rainer Stelzer <[email protected]> To: EMC developers <[email protected]> Subject: Re: [Emc-developers] partial success on 5 Axis Router Message-ID: <[email protected]> Content-Type: text/plain; charset=UTF-8; format=flowed Hi Juergen, great achievement. congrats. What CAD/CAM toolchain do you use ?? Did you try Fusion 360 ? When using a CAM tool, switching the modes should not be a point until machining high precision parts. For the precision needed by casting patterns it will surely work. Or do you need it, because you do manual programming ? cheers Rainer > for the curious > > https://www.youtube.com/watch?v=jkAgMhvbEjw > > still fighting the change from TCP to idendity mode, but so far, I'm happy. > > Thanks to all the folks working on LinuxCNC. > > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------ ------------------------------ Subject: Digest Footer _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------ End of Emc-developers Digest, Vol 186, Issue 32 *********************************************** _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
