On Thursday, January 27, 2022 9:54:54 AM EST Steffen Möller wrote: > Fresh start! > > Dear Gene, > > I would like to catch the problem before you start building and also > exclude the possibility that somehow the code base of yours is affected > by your previous checkout - just because I cannot inspect your machine > from here. Once that was successful, yes, then this can be optimized. > > First thing is that the system needs to be truly updated, nothing > half-ish. Remember Steffen, that this sd card was A, new, and b, written with dd using 2021-10-30-raspios-bullseye-armhf-full.img,
sd card then put in the pi and booted, after I had fixed the no network problem by filling in the defaults for a static network by putting my hosts file over the default, editing /etc/hostname to be the same as the buster install it would replace, and filling in and uncommenting the bottom of its /etc/dhcpcd.conf file to match the buster net config. It was then booted, I assigned the country, keyboard and other first boot things in raspi-config. rebooted, at which point it ran the update/ upgrade stuff bringing it up to date by upgrading 129 pkgs then. The apt update/apt upgrade -y has been done several more times, and just now replaced 5 python pkgs. sudo apt dist-upgrade just returned: ============================= pi@rpi4:/media/pi/workspace $ sudo apt dist-upgrade -y Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: dctrl-tools dkms libfuse2 libxtables-dev raspberrypi-kernel-headers Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ============================= So it is, ANAICT, a fully uptodate bullseye install. In the middle of that, I mounted the drive I had built a 5.16.2-rt19 kernel on and installed that, so a uname -a now returns: =========================== Linux rpi4 5.16.2-rt19-rt19-v7l+ #3 SMP PREEMPT_RT Tue Jan 25 01:14:16 EST 2022 armv7l GNU/Linux =========================== Almost as bleeding edge as has been announced on the linux-rt list. I have since ran the first of my scripts to build master, then scanned the output for missing dependency's, installing those I spot in the back trace. I have not adjusted anything in the config, or debian directories of this git clone which is of the raspberry/linux. I have been doing this build since jessie days so I'm not new to this. At one point pi stuff was being built on an odroid C2 at the buildbot, but crashed several times a week and has been replaced with an rpi4 I believe, same as this one. I faintly recall having to do something for buster but at 87 yo I do not recall what it was I had to do back then. And I have not noted the build your own recipe in our wiki as having been updated since wheezy, so it is, shall we say, a bit long in the tooth in 2022. :) And the next missing dependency is "convert", and its a showstopper for configure. > Please do > > sudo apt update that showed 5 pkgs could be upgraded which I did. > sudo apt -u dist-upgrade see above > Anything surprising/weird/many packages listed? Then please tell me or > continue with "yes". > > Wherever you have the disk space please then do a I have the space, its a 240gig SSD > git clone https://github.com/LinuxCNC/linuxcnc.git bullseye-linuxcnc Will take an hour or more, my net connection is leisurely. > cd new-dir-name > > python3 --version # should be more recent than 3.7 pi@rpi4:/media/pi/workspace $ python3 --version Python 3.9.2 > Please ping me again once you got to this stage. And configure still bails out: checking for convert... none configure: error: no convert, documentation cannot be built pi@rpi4:/media/pi/workspace $ > Thanks and regards > > Steffen > > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > . Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
