Package: linuxcnc-uspace
Version: 2.9.0~pre0+git20220402.2500863908-4
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: vectorhast...@gmail.com
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation? I installed the package from respository
with sudo apt-get install
* What exactly did you do (or not do) that was effective (or
ineffective)? Tried to understand from the error message if there was a
missing package, but could not find one.
* What was the outcome of this action? It did not help
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: arm64 (aarch64)
Kernel: Linux 4.19.0-20-rt-arm64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linuxcnc-uspace depends on:
ii blt 2.5.3+dfsg-4.1
ii bwidget 1.9.15-1
ii iptables 1.8.8-1
ii libboost-python1.74.0 1.74.0-16
ii libc6 2.33-7
ii libcairo2 1.16.0-5
ii libedit2 3.1-20210910-1
ii libepoxy0 1.5.10-1
ii libgcc-s1 12.1.0-2
ii libglib2.0-0 2.72.2-2
ii libgtk-3-0 3.24.34-1
ii libgtk2.0-0 2.24.33-2
ii libgtksourceview-3.0-dev 3.24.11-2+b1
ii libmodbus5 3.1.6-2
ii libpango-1.0-0 1.50.7+ds-1
ii libpangocairo-1.0-0 1.50.7+ds-1
ii libpython3.10 3.10.5-1
ii libstdc++6 12.1.0-2
ii libtirpc3 1.3.2-2
ii libtk-img 1:1.4.13+dfsg-1
ii libtk8.6 8.6.12-1
ii libudev-dev 251.2-5
ii libudev1 251.2-5
ii libusb-1.0-0 2:1.0.26-1
ii libx11-6 2:1.7.5-1
ii libxinerama1 2:1.1.4-3
ii libxmu6 2:1.1.3-3
ii mesa-utils 8.5.0-1
ii procps 2:3.3.17-7+b1
ii psmisc 23.5-1
ii python3 3.10.4-1+b1
ii python3-cairo 1.20.1-3
ii python3-configobj 5.0.6-5
ii python3-gi-cairo 3.42.1-1
ii python3-numpy 1:1.21.5-1
ii python3-opengl 3.1.5+dfsg-1
ii python3-tk 3.10.5-1
ii python3-xlib 0.29-1
ii tcl-tclreadline [tclreadline] 2.3.8-1
ii tcl8.6 8.6.12+dfsg-1
ii tclx8.4 [tclx] 8.4.1-4
ii tk8.6 8.6.12-1
ii udev 251.2-5
Versions of packages linuxcnc-uspace recommends:
ii espeak 1.48.15+dfsg-3
ii espeak-ng 1.51+dfsg-7
ii gstreamer1.0-tools 1.20.2-1
pn hostmot2-firmware-all <none>
ii librsvg2-dev 2.54.3+dfsg-1
ii linuxcnc-doc-en [linuxcnc-doc] 2.9.0~pre0+git20220402.2500863908-4
ii pyqt5-dev-tools 5.15.6+dfsg-1+b2
ii python3-dbus 1.2.18-3+b1
ii python3-dbus.mainloop.pyqt5 5.15.6+dfsg-1+b2
ii python3-espeak 0.5-4+b1
ii python3-opencv 4.5.4+dfsg-9+b7
ii python3-pil 9.1.1-1
ii python3-pil.imagetk 9.1.1-1
ii python3-pyqt5 5.15.6+dfsg-1+b2
ii python3-pyqt5.qsci 2.11.6+dfsg-4+b1
ii python3-pyqt5.qtopengl 5.15.6+dfsg-1+b2
ii python3-pyqt5.qtsvg 5.15.6+dfsg-1+b2
ii python3-pyqt5.qtwebkit 5.15.6+dfsg-1+b2
ii sound-theme-freedesktop 0.8-2
Versions of packages linuxcnc-uspace suggests:
pn mesaflash <none>
-- no debconf information
Error's reported by package:
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
LINUXCNC - 2.9.0~pre0
Machine configuration directory is '/home/maker/linuxcnc/configs/sim.axis'
Machine configuration file is 'axis_mm.ini'
INIFILE=/home/maker/linuxcnc/configs/sim.axis/axis_mm.ini
VERSION=1.1
PARAMETER_FILE=sim_mm.var
TPMOD=
HOMEMOD=
TASK=milltask
HALUI=halui
DISPLAY=axis
COORDINATES=X Y Z
KINEMATICS=trivkins
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: io
Starting HAL User Interface program: halui
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Found file(lib): /usr/share/linuxcnc/hallib/sim_spindle_encoder.hal
Found file(lib): /usr/share/linuxcnc/hallib/axis_manualtoolchange.hal
Found file(lib): /usr/share/linuxcnc/hallib/simulated_home.hal
Starting TASK program: milltask
Starting DISPLAY program: axis
LIBGL: Initialising gl4es
LIBGL: v1.1.1 built on Jun 26 2019 09:49:33
LIBGL: Using GLES 2.0 backend
LIBGL: loaded: libGLESv2.so
LIBGL: loaded: libEGL.so
LIBGL: Using GLES 2.0 backend
LIBGL: Targeting OpenGL 2.0
LIBGL: glX Will try to recycle EGL Surface
LIBGL: Current folder is:/home/maker/linuxcnc/configs/sim.axis
Shutting down and cleaning up LinuxCNC...
task: 3962 cycles, min=0.000036, max=0.001632, avg=0.001092, 0 latency
excursions (> 10x expected cycle time of 0.001000s)
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Debug file information:
Note: Using POSIX realtime
link (updating variable file): No such file or directory
Traceback (most recent call last):
File "/usr/bin/hal_manualtoolchange", line 69, in <module>
nf.start(app); nf.makecommand(app, "_", _)
File "/usr/lib/python3/dist-packages/nf.py", line 120, in start
source_lib_tcl(r, "support.tcl")
File "/usr/lib/python3/dist-packages/nf.py", line 112, in source_lib_tcl
r.tk.call("source", os.path.join(tcl_libdir, f))
_tkinter.TclError: couldn't load file
"/usr/lib/tcltk/aarch64-linux-gnu/Img1.4.13/libtifftcl4.1.0.so":
/usr/lib/tcltk/aarch64-linux-gnu/Img1.4.13/libtifftcl4.1.0.so: undefined
symbol: _TIFFsetString, version LIBTIFF_4.0
LIBGL: Error while gathering supported extension (eglInitialize:
EGL_BAD_DISPLAY), default to none
Traceback (most recent call last):
File "/usr/bin/axis", line 128, in <module>
nf.start(root_window)
File "/usr/lib/python3/dist-packages/nf.py", line 120, in start
source_lib_tcl(r, "support.tcl")
File "/usr/lib/python3/dist-packages/nf.py", line 112, in source_lib_tcl
r.tk.call("source", os.path.join(tcl_libdir, f))
_tkinter.TclError: couldn't load file
"/usr/lib/tcltk/aarch64-linux-gnu/Img1.4.13/libtifftcl4.1.0.so":
/usr/lib/tcltk/aarch64-linux-gnu/Img1.4.13/libtifftcl4.1.0.so: undefined
symbol: _TIFFsetString, version LIBTIFF_4.0
4464
4510
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
