Runtests results continued after hitting Ctrl+C on the hung: /home/ntu/linuxcnc/tests/motion/g0
Running test: /home/ntu/linuxcnc/tests/motion/g0 ^C*** /home/ntu/linuxcnc/tests/motion/g0: XFAIL: test run exited with 130 Running test: /home/ntu/linuxcnc/tests/motion/jogwheel-axis Running test: /home/ntu/linuxcnc/tests/motion/jogwheel-joint Running test: /home/ntu/linuxcnc/tests/multiclick Running test: /home/ntu/linuxcnc/tests/mux Running test: /home/ntu/linuxcnc/tests/near.0 Running test: /home/ntu/linuxcnc/tests/overrun Running test: /home/ntu/linuxcnc/tests/oword/sub.0 Running test: /home/ntu/linuxcnc/tests/oword/while.0 Running test: /home/ntu/linuxcnc/tests/pyhal Running test: /home/ntu/linuxcnc/tests/realtime-math Running test: /home/ntu/linuxcnc/tests/remap/duplicate-o-word Running test: /home/ntu/linuxcnc/tests/remap/fail/args.0 Running test: /home/ntu/linuxcnc/tests/remap/fail/args.1 Running test: /home/ntu/linuxcnc/tests/remap/fail/args.2 Running test: /home/ntu/linuxcnc/tests/remap/fail/body-ngc Running test: /home/ntu/linuxcnc/tests/remap/fail/body-py Running test: /home/ntu/linuxcnc/tests/remap/fail/canon_error Running test: /home/ntu/linuxcnc/tests/remap/fail/epilog Running test: /home/ntu/linuxcnc/tests/remap/fail/prolog Running test: /home/ntu/linuxcnc/tests/remap/introspect Running test: /home/ntu/linuxcnc/tests/remap/m30-interaction Running test: /home/ntu/linuxcnc/tests/remap/nested-remaps-oword Running test: /home/ntu/linuxcnc/tests/remap/oword-pycall Running test: /home/ntu/linuxcnc/tests/remap/posargs.0 Running test: /home/ntu/linuxcnc/tests/remap/predefined-named-params Running test: /home/ntu/linuxcnc/tests/remap/remap-io Running test: /home/ntu/linuxcnc/tests/remap/remap-reentry Running test: /home/ntu/linuxcnc/tests/remap/sequencing Running test: /home/ntu/linuxcnc/tests/remap/variable-injection Running test: /home/ntu/linuxcnc/tests/rs274ngc-startup Running test: /home/ntu/linuxcnc/tests/rtapi-shmem Running test: /home/ntu/linuxcnc/tests/rtapi_printf.0 Running test: /home/ntu/linuxcnc/tests/save.0 Skipping disabled test: /home/ntu/linuxcnc/tests/save.1 Running test: /home/ntu/linuxcnc/tests/single-step Running test: /home/ntu/linuxcnc/tests/source.0 Running test: /home/ntu/linuxcnc/tests/startup-state Running test: /home/ntu/linuxcnc/tests/statbuffer-g5x-abort Running test: /home/ntu/linuxcnc/tests/stepgen.0 Running test: /home/ntu/linuxcnc/tests/stepgen.1 Running test: /home/ntu/linuxcnc/tests/stepgen.2 Running test: /home/ntu/linuxcnc/tests/symbols.0 Running test: /home/ntu/linuxcnc/tests/symbols.1 Running test: /home/ntu/linuxcnc/tests/t0/nonrandom *** /home/ntu/linuxcnc/tests/t0/nonrandom: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/t0/random-with-t0 *** /home/ntu/linuxcnc/tests/t0/random-with-t0: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/t0/random-without-t0 *** /home/ntu/linuxcnc/tests/t0/random-without-t0: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/tclsh-extensions Running test: /home/ntu/linuxcnc/tests/threads.0 Running test: /home/ntu/linuxcnc/tests/threads.1 Running test: /home/ntu/linuxcnc/tests/timedelay.0 Running test: /home/ntu/linuxcnc/tests/tlo Running test: /home/ntu/linuxcnc/tests/tool-info/non-random Running test: /home/ntu/linuxcnc/tests/tool-info/random-no-startup-tool Running test: /home/ntu/linuxcnc/tests/tool-info/random-with-startup-tool Running test: /home/ntu/linuxcnc/tests/toolchanger/m61 Running test: /home/ntu/linuxcnc/tests/toolchanger/reload-tool/non-random Running test: /home/ntu/linuxcnc/tests/toolchanger/reload-tool/random Running test: /home/ntu/linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom *** /home/ntu/linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/toolchanger/toolno-pocket-differ/random *** /home/ntu/linuxcnc/tests/toolchanger/toolno-pocket-differ/random: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/twopass-personality *** /home/ntu/linuxcnc/tests/twopass-personality: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/twopass *** /home/ntu/linuxcnc/tests/twopass: XFAIL: test run exited with 1 Running test: /home/ntu/linuxcnc/tests/uspace/spawnv-root *** /home/ntu/linuxcnc/tests/uspace/spawnv-root: XFAIL: test run exited with 1 Runtest: 242 tests run, 226 successful, 16 failed + 0 expected, 3 skipped Failed: /home/ntu/linuxcnc/tests/interp/compile /home/ntu/linuxcnc/tests/linuxcncrsh-tcp /home/ntu/linuxcnc/tests/linuxcncrsh /home/ntu/linuxcnc/tests/loadrt.1 /home/ntu/linuxcnc/tests/loadrt.2 /home/ntu/linuxcnc/tests/mdi-queue/oword-queue-buster /home/ntu/linuxcnc/tests/mdi-queue/simple-queue-buster /home/ntu/linuxcnc/tests/motion/g0 /home/ntu/linuxcnc/tests/t0/nonrandom /home/ntu/linuxcnc/tests/t0/random-with-t0 /home/ntu/linuxcnc/tests/t0/random-without-t0 /home/ntu/linuxcnc/tests/toolchanger/toolno-pocket-differ/nonrandom /home/ntu/linuxcnc/tests/toolchanger/toolno-pocket-differ/random /home/ntu/linuxcnc/tests/twopass-personality /home/ntu/linuxcnc/tests/twopass /home/ntu/linuxcnc/tests/uspace/spawnv-root Alec _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
