# Comment added
[ smoe](https://hosted.weblate.org/user/smoe/ "Steffen Möller"): [Hosted Weblate](https://hosted.weblate.org) / [LinuxCNC](https://hosted.weblate.org/projects/linuxcnc/) / [LinuxCNC Documentation](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/) / [English](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/) ## Source string When True, counts and position are rounded or reset (depends on index-mode) on next rising edge of channel-I. Every time position is reset because of Index, index-enabled pin is set to 0 and remain 0 until connected HAL pin does not set it. ## Source string description type: Table ## Comment @Some good soul: Please make this easier to understand. [Edit this string](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?checksum=2f9351a453677822#comments) ## Source string location [src/drivers/gm.adoc:201](https://github.com/LinuxCNC/linuxcnc/blob/master/docs/src/drivers/gm.adoc?plain=1#L201) ## Translation Info All strings | [ 30,449 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-docs/en/) | -------------------------------------------------------------------|-----------|---- Translated strings | [ 30,449 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:>=translated) | [ 100% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:>=translated) Untranslated strings | [ 0 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:empty) | [ 0% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:empty) Unfinished strings | [ 0 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:<translated) | [ 0% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:<translated) Strings marked for edit | [ 0 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:needs-editing) | [ 0% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:needs-editing) [View](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/) [Weblate, the libre continuous localization system.](https://weblate.org/) Generated on Sept. 12, 2022, 1:03 p.m..
_______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
