tis 2023-01-17 klockan 19:02 +0100 skrev Hans Unzner: > > Am 17.01.23 um 02:44 schrieb gene heskett: > > If using a wireless keyboard, check the batteries with a voltmeter. > > Looooong > > keydowns may cause a fadeout that does not register as a keyup > > event. > > So when it comes time to send the keyup, the batteries are too low. > > Any battery that's below 1.4 volts probably need to see if you can > > hit > > the trash can with it from where ever you are. The one time that > > hit > > me, taught me to use the mdi. > Correct me if I am wrong, but this is about clicking the buttons on > the > GUI and not using the keyboard buttons. > The unreliable behavior of using the keyboard to jog is well-known. Then using keyboard. Press esc and machine stop but sticky behavior persist if key is pressed again.
Have tried G90 before but I now also try jogging using GUI and then sticky behavior on keyboard disappear. It does not happen every time. This time g-code was stopped in the middle of program because I made an error in g-code mill drilled instead of ramping. Nicklas Karlsson _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
