The most likely issue is that your repo uses python 2.7 code and that is
depreciated in Bookworm which uses Python 3.11
Linuxcnc is now also a python 3 application to match this change.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 5 Feb 2024 at 06:45, ELHIMA Moustapha via Emc-developers <
emc-developers@lists.sourceforge.net> wrote:
> Hi Guys
> I have a question about Dxf2Gcode on Debian BookWorm
> I had downloaded the source file from sourceforge.Did :sudo git clone
> git://git.code.sf.net/p/dxf2gcode/sourcecode dxf2gcode-sourcecodethen go
> to the source folder and try to run the dxf2gcode withsudo python3
> ./make_tr.pysudo python3 ./make_py_uic.pysudo python3 ./st-setup.py
> buildand thensudo python3 dxf2gcode.py
> The interface start correctly and I can load a dxf file.The problem come
> when i try to generate the gcode fileThe interface crash and then I get
> this error
>
> --- Logging error ---Traceback (most recent call last):File
> "/usr/lib/python3.11/logging/__init__.py", line 1113, in
> emitstream.write(msg + self.terminator)File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode/gui/messagebox.py",
> line 80, in writeself.verticalScrollBar().setValue(1e9)TypeError:
> setValue(self, a0: int): argument 1 has unexpected type 'float'Call
> stack:File "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line
> 1210, in <module>sys.exit(app.exec_())File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 746, in
> openself.load()File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 867, in
> loadlogger.info(self.tr('Loaded blocks: %s') %
> len(self.valuesDXF.blocks.Entities))Message: 'Blocs chargés: 0'Arguments:
> ()Chargé 135 Entités géométriques; réduit à 1 Contours; calques utilisés:
> [0]; nombre d'inserts: 0--- Logging error ---Traceback (most recent call
> last):File "/usr/lib/python3.11/logging/__init__.py", line 1113, in
> emitstream.write(msg + self.terminator)File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode/gui/messagebox.py",
> line 80, in writeself.verticalScrollBar().setValue(1e9)TypeError:
> setValue(self, a0: int): argument 1 has unexpected type 'float'Call
> stack:File "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line
> 1210, in <module>sys.exit(app.exec_())File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 746, in
> openself.load()File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 874, in
> loadlogger.info(self.tr('Loaded %i entity geometries; reduced to %i
> contours; used layers: %s; number of inserts %i')Message: "Chargé 135
> Entités géométriques; réduit à 1 Contours; calques utilisés: [0]; nombre
> d'inserts: 0"Arguments: ()Drawing units: millimeters--- Logging error
> ---Traceback (most recent call last):File
> "/usr/lib/python3.11/logging/__init__.py", line 1113, in
> emitstream.write(msg + self.terminator)File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode/gui/messagebox.py",
> line 80, in writeself.verticalScrollBar().setValue(1e9)TypeError:
> setValue(self, a0: int): argument 1 has unexpected type 'float'Call
> stack:File "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line
> 1210, in <module>sys.exit(app.exec_())File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 746, in
> openself.load()File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 877, in
> loadself.setMeasurementUnits(g.config.metric, True)File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 711, in
> setMeasurementUnitslogger.info(self.tr("Drawing units:
> millimeters"))Message: 'Drawing units: millimeters'Arguments: ()Traceback
> (most recent call last):File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 299, in
> exportShapesself.updateExportRoute()File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode.py", line 378, in
> updateExportRouteself.canvas_scene.addexproute(layer.exp_order, layer.nr)File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode/gui/canvas2d.py", line
> 418, in addexprouteself.routetext.append(RouteText(text=("%s,%s" %
> (layer_nr,
> shape_nr+1)),^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^File
> "/home/stelus/dxf2gcode-sourcecode/source/dxf2gcode/gui/routetext.py", line
> 59, in __init__QFont("Arial", 10/self.sc),^^^^^^^^^^^^^^^^^^^^^^^^^^TypeError:
> arguments did not match any overloaded call:QFont(): too many
> argumentsQFont(family: str, pointSize: int = -1, weight: int = -1, italic:
> bool = False): argument 2 has unexpected type 'float'QFont(a0: QFont, pd:
> QPaintDevice): argument 1 has unexpected type 'str'QFont(a0: QFont):
> argument 1 has unexpected type 'str'QFont(variant: Any): too many
> argumentsAbandon
>
> I was using the same source with debian Wheezy without any problem
> Do you have any idea?
> Thanks for your help
>
>
> Cordialement,
> Best Regards,
>
> Moustapha Elhima
> P Penser à préserver l'environnement avant d'imprimer ce message. Merci
>
> | | Sans virus.www.avast.com |
>
>
> _______________________________________________
> Emc-developers mailing list
> Emc-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-developers
>
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
