Sandy,
     
     Recent TREG and [email protected] mail shows the following:
     
     Author:  [email protected] at P_Internet_mail
     Date:    7/25/96  7:57 PM
     Priority: Normal
     BCC: Tania Grant at P_BSD
     TO: <[email protected]> at P_Internet_Mail
     CC: <[email protected]> at P_Internet_Mail
     CC: <[email protected]> at P_Internet_Mail
     Subject: re: Poland and Hungary, Regulatory Requirements
     ------------------------------- Message Contents 
     -------------------------------
     Hello Ron,
     
     Please let me answer at least some of your questions concerning 
     Safety, EMC and PTT regulatory requirements in Poland and Hungary.
     
     1. POLAND
     a) Polish Safety Standard: PN-93/T-42107 [IEC 950 (1991) + Amds. with  
        minor deviations]. An outside CB Test Report will be accepted, but  
        samples are required.
        Contact: Laboratorium Elektrotechniczne PCBC
                Mr. Wiktor Greviennikow
                ul. Klobucka 23A
                02-699 Warszawa, Poland
                Phone: +48 22 47 99 16
                Fax: +48 22 47 12 22
     
     b) Polish EMC/RFI Standard: PN 89/E-06251. EMC/RFI test reports are    
        only accepted from a PCBC accredited EMC lab.
        Contact: Laboratorium Badawcze ELTEST
                 ul. Ratuszowa 11, Room No. 136
                 Warszawa, Poland
                 Phone: +48 22 19 39 66 (Mr. Marek Jewtuch) or
                 Phone: +48 22 18 99 92 (Mr. Edward Rudalski)
     
     c) Polish PTT approval:
        Contact: Institute of Telecommunications
                 Mr. Tomasz Niewodniczanski
                 ul. Kopernika 11
                 51-622 Wroclaw, Poland
                 Phone: +48 71 72 88 12
                 Fax: +48 71 72 88 78
     ----------------------------------------
     Author:  "Ray Russell" <[email protected]> at P_Internet_mail
     Date:    10/9/96  8:08 AM
     Priority: Normal
     BCC: Tania Grant at P_BSD
     TO: [email protected] at P_Internet_Mail
     TO: Brent Taira <[email protected]> at P_Internet_Mail
     Subject: Re: Poland Certification
     ------------------------ Message Contents-----------------------------
          Dear Brent,
          
          As a former Compliance Engineer for a PC manufacturer, we found   
          that Poland would accept EMI and a CB test report from NEMKO. If 
          interested, you might contact:
          
          Morten Smith
          Phone 47 22 96 03 30
          FAX   47 22 69 86 36.
          
          I hope this helps,
          
          Ray Russell
     
     I hope this helps you, Sandy.  Please note that the ul. abreviation in
     the addresses does not stand for downsized UL but for 'ulitza', meaning 
     'street'.

          Tania Grant, Octel Communications Corporation
          [email protected]

______________________________ Reply Separator _________________________________
Subject: standard requirements
Author:  "Sandy Florence-ESF003" <[email protected]> at 
P_Internet_mail
List-Post: [email protected]
Date:    11/12/96 10:27 AM


Does anyone know the ITE test standard requirements for Poland ?   

Thanks. 

Sandy 

Reply via email to