In message <"Macintosh */PRMD=MOT/ADMD=MOT/C=US/"@MHS> 
Dave Clement-LDC009 writes: 

> FYI, I have a memo from James L. Cigler, Chief, Laboratory Accreditation 
> Program, NIST.
> 
> A quote from his memo;
> "All calibration and testing laboroatories desiring to be accredited by 
> NVLAP after December 1, 1996, must demonstrate compliance with these 
> traceability requirements. All calibration and testing laboratories 
> currently accredited by NVLAP must demonstrate compliance with these 
> traceability requirements by end December 1997."
> 
> The traceability referenced in the memo refers to calibration of test 
> equipment. When we select cal houses for our test equipment we look for 
> compliance to MIL-STD-45662A (Calibration System Requirements) which will 
> address NVLAP requirements.

Hope you won't mind a slightly pedantic comment from across the drink, 
but MIL-STD-45662A no longer is applicable and has been canceled - vide 
US Army Notice 2 of February 27 1995 superseding Notice 1 of 20 January 
1995: 

    "MIL-STD-45662A, dated 1 August 1988, is hereby canceled.
    Future acquisitions should refer to International Organization 
    for Standards (ISO) 10012-1, "Quality Assurance Requirements
    for Measuring Equipment", Part 1: Meteorological (sic -
    misspelt in original! - WL) Confirmation System for Measuring
    Equipment";  American National Standards Institute (ANSI)/
    National Conference of Standards Laboratories (NCSL) Z540-1,
    "General Requirements for Calibration Laboratories and
    Measuring and Test Equipment";  or comparable standards as
    alternatives to MIL-STD-45662A."

I have also a copy of a formal "Adoption Notice" by the USAF which 
states:

    "International Organization for Standardization (ISO) 
    10012-1 "Quality assurance requirements for measuring
    equipment - Part 1: Metrological (got it right that time! WL)
    confirmation system for measuring equipment,"  was adopted
    on 7 January 1994 for use by the Department of Defense (DoD)."

Apologies if by the time this appears everyone has realised ISO 10012-1 
is now the applicable standard.  

-- 
Bill Lyons - [email protected] / [email protected]
=========================================================================
Claude Lyons Limited  Brook Road  Waltham Cross   Herts EN8 7LR   England
Leaders in Voltage and Power Control - Precise Electrical Instrumentation
Tel: +44 1992 768 888     Fax: +44 1992 788 000     Telex: 22724 CL LTD G
email: [email protected]           URL: http://www.lyons.demon.co.uk
=========================================================================

Reply via email to