As an aside, what are some ways one can obtain the current list of
Operating Staff decisions for EN60 950? 

> ----------
> From:         Egon H. Varju[SMTP:[email protected]]
> Sent:         Thursday, September 11, 1997 3:12 AM
> To:   Mel Pedersen
> Cc:   EMC-PSTC
> Subject:      Y capacitors and Supplementary Insulation
> 
> Mel,
> 
> According to the Standard EN 60 950 List of Decisions of the CENELEC
> OSM/EE
> (Operational Staff Meeting for Electronic Equipment), dated 6/97:
> 
> Clause 1.5.1:
> 
> - Capacitors certified to IEC 384-14 1.ed will be accepted for 5 years
> after DOW of  EN 132400.
> - Capacitors certified to IEC 384-14 2.ed and/or EN 132400 are
> acceptable.
> - Y1 capacitors are are accepted across reinforced insulation.
> - Y1 and Y2 capacitors are are accepted across basic insulation.
> - Y1 and Y2 capacitors are are accepted across supplementary
> insulation.
> - (So, obviously, two Y2 caps in series are accepted across reinforced
> insulation - my words, not CENELEC).
> - The enclosures of Y1 capacitors are considered to comply with the
> requirements of reinforced insulation with the exception of the area
> near
> to the leads where the insulation becomes thinner.
> 
> Clause 2.9:
> 
> - The insulation of the outside of a capacitor according to IEC 384-14
> 2.ed. fulfils (sic) the requirements for basic insulation.  For
> reinforced
> insulation the distance requirements of EN 60065 and EN 60950 must be
> fulfilled.
> 
> The above are published decisions; anything else is pure speculation.
> 
> By the way, if IEC 384-14 requires larger spacings than IEC 950, then
> obviously there is no problem using such a capacitor in your ITE unit.
> 
> Yes, the end-product standard prevails, so just use IEC 950 spacings
> on
> your PWB.
> 
> Hope this helps.
> 
> Cheers,
> Egon
> 
> __________________________________________________________
> 
>  Egon H. Varju, P.Eng.  September 11, 1997 @ 3:48 PM
>  CSA Pacific Region
>  Tel:   1-604-244-6640       HAVE MODEM  -  WILL TRAVEL
>  Fax:   1-604-244-6600
>  E-mail:        [email protected]
>                 [email protected]
> __________________________________________________________
> 

Reply via email to