One other point to bear in mind - towers often prove to be better hosts 
than an equivalent desktop version. The FCC requires that the monitor be 
placed on top of the PC if it is a desktop unit in order to re-create a 
typical operating condition (refer fig 11 of ANSI C63.4).  I have seen 
several PCs which are ok UNTIL the monitor is placed on top of the host 
and causes the chassis to flex, reducing the shielding effectiveness of 
the host and letting the higher frequencies out.

Mark


> -----Original Message-----
>From: rbusche [SMTP:[email protected]]
>Sent: Wednesday, September 02, 1998 8:01 AM
>To: emc-pstc
>Subject: Recommendations for PCs
>
> ----------------------------------------------------
>We are in need of a PC to perform EMC testing in support of FCC and
>CISPR limits. We are looking for the latest, state of the art, system
>with at least 400 MHz processors. Can someone suggest to me (off line if
>desired) a good candidate for this application? It is surprising to me
>the number of quality systems that fail even BEFORE additional cards are
>added.
>
>Thanks in advance
>
>Rick Busche
>Evans & Sutherland
>Salt Lake City, Utah
>[email protected]
>
> ---------
>This message is coming from the emc-pstc discussion list.
>To cancel your subscription, send mail to [email protected]
>with the single line: "unsubscribe emc-pstc" (without the
>quotes).  For help, send mail to [email protected],
>[email protected], or [email protected] (the list
>administrators).
>
>
>---------
>This message is coming from the emc-pstc discussion list.
>To cancel your subscription, send mail to [email protected]
>with the single line: "unsubscribe emc-pstc" (without the
>quotes).  For help, send mail to [email protected],
>[email protected], or [email protected] (the list
>administrators).
>


Mark Briggs
[email protected]


---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], or [email protected] (the list
administrators).

Reply via email to