Don't have the figures to hand but having checked it out a while ago we have moved from the gold/yellow zinc passivation on steel parts to the silver/clear finish:
UK spec: BRIGHT ZINC PLATE TO BS 1706 Fe/Zn 8 c 1A US spec: BRIGHT ZINC, ASTM B633, TYPE III, Fe/Zn 8 This has a much lower resistance. We found the "gold" unacceptable for emc considerations. Chris James Engineering Services Manager Dolby Labs Inc. -----Original Message----- From: Knighten, Jim [mailto:[email protected]] Sent: Thursday, October 15, 1998 1:20 AM To: 'emc-pstc list server' Subject: Yellow Zinc Hi Guys, Does anyone know what a typical conductivity or resistivity is for yellow zinc coating??? Jim Dr. Jim Knighten e-mail: [email protected] Senior Consulting Engineer NCR 17095 Via del Campo San Diego, CA 92127 http://www.ncr.com Tel: 619-485-2537 Fax: 619-485-3788 --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
